Serving Southern Maine Since 1996

Heater Rentals

KBE5L COMMERCIAL HEATER

The newly upgraded KBE5L 2-Step is now equipped with a High and Low output control making it very economical. Also included is a Fuel preheater to keep fuel moving smoothly as temperature decreases. KBE5L’s state of the art combustion chamber enables virtually 100% fuel to energy conversion. This translates to clean, odorless, smokeless operation and, more importantly, fuel savings. Impervious to nature’s elements (wind, rain, and snow), the KBE5S is able to transfer infrared heat directly to the object without any loss of heat or air movement.


Features:

  • SUNLIGHT WARMTH – VAL6’s radiant heat penetrates evenly and directly into surfaces just like sunlight.
  • BEST CHOICE FOR OUTDOORS – VAL6 is not affected by wind, unlike forced air heaters that suffer from heat loss in the ambient air.
  • HEAT TRANSFER – VAL6 generates infrared heat directly to the object without any air movement creating a dust-free comfortable environment.
  • ODORLESS – VAL6’s perfect combustion system produces no odor and no smoke while running.
  • ENERGY SAVINGS – VAL6’s state of the art combustion chamber enables virtually 100% fuel to energy conversion.
  • PORTABLE – This heater can be taken virtually anywhere that you need heat.
Heat Output High/Low: 118,000 BTU/hr - 100,000 BTU/hr
Nozzle High/Low: 0.90 gallons/hr -0.75 gallons/hr
Fuel Diesel, Kerosene
Tank Capacity 15 gallons
Power Source 120 V 60 Hz
Power Consumption (in ignition) 150 W
Power Consumption (in operation) High: 97 W - Low: 96 W
Safety Device Photocell flame monitor, 3A Fuse
REQUEST A QUOTE CALL TO RESERVE

PATRON MODEL E1.5 ELECTRIC HEATER

The E1.5 sets the standard for 120V electric space heaters. Built to run for 10 years without a break, it features a 116 CFM fan motor which distributes warm air throughout the room in a way you never thought possible. Instead of using it to warm a small area/personal space like other common space heaters, the E1.5 is meant to raise the temperature of an entire room by circulating the warm air in a much larger area.


Features:

  • For heating, drying, and ventilating
  • Integrated ambient thermostat from 32°F – 100°F
  • Overheat protection at 104°F
  • Durable steel casing with powder coating
  • Stainless jacketed heating coils
  • Fast, high temperature rise with uni-directional fan
  • User-friendly and proven reliability
  • UL / cUL Approved
Heat Output 5,100 BTU/Hr
Wattage 1,500W
Voltage 120V
Amperage 12.5 A
Airflow 116 CFM
Actual Weight 13.7 LBS
Power Cord 10-ft (12 AWG)
Dimensions 11" x 12" x 8"
Plug NEMA 5-15P
Noise Level 47 dB(A) 1m
REQUEST A QUOTE CALL TO RESERVE

PATRON MODEL E6 ELECTRIC HEATER

The Patron E6 is the newest member of the Patron electric family. Built with the same quality and ruggedness of all the other Patron heaters, it offers great opportunity for use in many applications. The E6 is a 240V unit and pulls 25 amps. This means it will run flawlessly off a regular clothing dryer outlet. Make sure your receptacle is a NEMA 14-30P or 14-50P, to ensure compatibility with our plug. The E6 produces a ton of heat, and disperses it in large areas.


Features:

  • For heating, drying, and ventilating
  • Integrated ambient thermostat from 32°F – 100°F
  • Overheat protection at 104°F
  • Durable steel casing with powder coating
  • Stainless jacketed heating coils
  • Fast, high temperature rise with uni-directional fan
  • User-friendly and proven reliability
  • UL / cUL Approved
Heat Output 20,500 BTU/Hr
Wattage 6,000W
Voltage 240V
Amperage 25 A
Airflow 250 CFM
Actual Weight 32.9 LBS
Power Cord 10-ft (8 AWG)
Dimensions 20" x 12" x 17"
Plug NEMA 14-30P (Dryer)
Noise Level 55 dB(A) 1m
Max Cable Length 100-ft (8AWG, 3-wire, SOOW)
REQUEST A QUOTE CALL TO RESERVE

PATRON MODEL E9 ELECTRIC HEATER

The Patron E9 is a top seller which exceeds expectations on a regular basis. It can be used in the most demanding of environments and has proven its abilities in hundreds of applications. The E9 is a 240V unit and draws either 25 or 37.5 amps. This means it will run flawlessly off a stove receptacle. Make sure your receptacle is a NEMA 14-50P configuration, to ensure compatibility with our plug. The E9 produces a ton of heat, and disperses it in large areas with its 350 CFM fan.


Features:

  • For heating, drying, and ventilating
  • Integrated ambient thermostat from 32°F – 100°F
  • Overheat protection at 104°F
  • Durable steel casing with powder coating
  • Stainless jacketed heating coils
  • Fast, high temperature rise with uni-directional fan
  • User-friendly and proven reliability
  • UL / cUL Approved
Heat Output 30,700 BTU/Hr
Wattage 9,000W
Voltage 240V
Amperage 37.5 A
Airflow 350 CFM
Actual Weight 39.9 LBS
Power Cord 10-ft (8 AWG)
Dimensions 23" x 14" x 18"
Plug NEMA 14-50P (Stove)
Noise Level 55 dB(A) 1m
Max Cable Length 50-ft (8AWG, 3-wire, SOOW) • 100-ft (6AWG, 3-wire, SOOW)
REQUEST A QUOTE CALL TO RESERVE

L.B. WHITE TRADESMAN® K75 KEROSENE FORCED AIR PORTABLE HEATER

The Tradesman K75 kerosene heater offers the ultimate in efficient portable temporary heat. For easy and reliable operation, all models feature solid state electronic ignition for sure starts, as well as thermostatic control for automatic operation and consistent temperature management. Durable components, sturdy design, and quality manufacturing add up to reliable performance for years of rough and heavy operation. Weighing in at only 27 lbs., the Tradesman K75 features an easy carry handle and is among the lightest kerosene heaters around. Run time of 9 hours on a tank full of fuel at constant operation. The Tradesman K75 is certified to meet or exceed csa-US or csa-Canadian standards. Recognized as a leader in construction heating for more than half a century, L.B. White offers the technical expertise and knowledgeable customer support you can count on for all your construction heating needs.


Features:

  • Convenient fuel with onboard fuel tank and option to run on kerosene, diesel or fuel oil #1
  • Easy to operate with onboard air diagnostic system, fuel & pressure gauges, and digital space temp display
  • 99% direct-fired fuel efficiency boosted by onboard thermostat
  • Easy to maneuver with handle
Tradesman® K75
BTU/HR Rating 75,000
Heated Air Output (CFM) 265
Fuel Type Kerosene
Fuel Consumption Max (gal/hr) 0.6
Tank Capacity (gal) 5
Operating Time Max (hr) 8.3
Amps (continuous) 1.6
Pump Pressure (PSI) 3.8
Motor Horsepower 1/8
L x W x H 32.0 x 11.8 x 16.8
Shipping Weight (lbs) 32
Thermostat Standard
Fuel & Pump Pressure Gauges Standard / Standard
On/off Switch Standard
Cord Caddy Standard
U.S./CA Certification Yes
REQUEST A QUOTE CALL TO RESERVE

L.B. WHITE TRADESMAN® K175 KEROSENE FORCED AIR PORTABLE HEATER

The Tradesman K175 kerosene heater offers the ultimate in efficient portable temporary heat. For easy and reliable operation, all models feature solid state electronic ignition for sure starts, as well as thermostatic control for automatic operation and consistent temperature management. Durable components, sturdy design, and quality manufacturing add up to reliable performance for years of rough and heavy operation. Weighing in at only 60 lbs., the Tradesman K125 features wheels and an easy pull handle. Run time of 10 hours on a tank full of fuel at constant operation. The Tradesman K125 is certified to meet or exceed CSA-US or CSA-Canadian standards. Recognized as a leader in construction heating for more than half a century, L.B. White offers the technical expertise and knowledgeable customer support you can count on for all your construction heating needs.


Features:

  • Convenient fuel with onboard fuel tank and option to run on kerosene, diesel or fuel oil #1
  • Easy to operate with onboard air diagnostic system, fuel & pressure gauges, and digital space temp display
  • 99% direct-fired fuel efficiency boosted by onboard thermostat
  • Easy to maneuver with wheels and handle
Tradesman® K175
BTU/HR Rating 175,000
Heated Air Output (CFM) 600
Fuel Type Kerosene
Fuel Consumption Max (gal/hr) 1.3
Tank Capacity (gal) 13
Operating Time Max (hr) 10
Amps (continuous) 3.2
Pump Pressure (PSI) 6.5
Motor Horsepower 1/4
L x W x H 41.8 x 23.1 x 26.1
Shipping Weight (lbs) 72
Thermostat Standard
Fuel & Pump Pressure Gauges Standard / Standard
On/off Switch Standard
Cord Caddy Standard
U.S./CA Certification Yes
REQUEST A QUOTE CALL TO RESERVE
Share by: