Material Handling Rentals

PROBST FTZ-MULTI FRAME MATERIAL HANDLER

3,307lb working load limit  •  8” – 49” opening range

World famous PROBST QuickCLAMPs eliminate the need to use lifting anchors, slings to lift or forks and pry bars to set products into position. The automatic lock and release mechanism speeds the cycle time and keeps hands clear of danger. Optional Height Adjustment Brackets work with the UNI, MAXI, & MULTI. The MULTI model can be customized for your application with several gripping options. First, Select your frame/specifications, then select the appropriate gripper option. Available grippers include rubber or urethane grippers, rock grippers or even our unique fluid filled retaining wall clamp gripper (for lifting multiple split faced blocks at once).

HAUGEN INDUSTRIAL JIB

2,050 lbs. capacity  •  Weighs 525 lbs.

• Adjustable jib booms for telehandlers
• Adjusts from 4 feet to 12 feet with 8 positions
• Comes standard with one 5-ton Crosby eye hook and shackle
• Meets ANSI and OSHA standards
• Easily adjusts and held with a heavy duty pin
• Position indicators ensure the operator knows the correct position on the load chart
• Standard pocket size 3 1/2” x 7 1/2”
• Pocket spacing is 22.50” ID. and 37.50” OD

HAUGEN WORK PLATFORM 4' x 6'

MWP 4'x6'  •  1 Door  •  1,000 lbs. capacity  •  Weighs 487 lbs.

Work Platforms for Telehandlers

• Collapsible Sides easy assembly and disassembly.  NO TOOLS REQUIRED!
  
• Heavy Duty Steel Mesh Floor for for years of dependability.
• Safety Restraint Tie Downs are standard on all Platforms.
• Industrial hinges and latches for strength and safety.
• Spring Loaded Doors are self-latching/self-closing allowing the doors to remain rigid and sturdy.
  
• Fork Pockets to fit fork tines up to 2.75" x 7.75".
• Heavy Duty Fork Pins secure the platform to the fork tines.
  
• Safety Pins attached to secure side railings.
• Transport Pockets on right side are standard (except MWP 4x4) for loading and unloading ONLY.
  
• Meets and/or exceeds ANSI/OSHA B56.6-2016 standards
• Meets and/or exceeds CSA B335-04 standards
  

Safety Features:

• Safety pins are standard for all side rails. Each pin is attached to the rail by a cable to prevent losing the safety pins.
• Spring Loaded Doors gives the door extra strength and allows the door to remain rigid at all times.
• Safety Restraint Tie Down are standard on all platforms. This gives you a safe place to connect your safety harnesses.
• Right Hand Transport Pockets are standard to make it easy to transport your platform. To be used for loading and unloading only.
• Pins Over Your Fork Tines Each pin is chained to the platform. Fits to most Telehandlers.

GENIE SLA20 20 FOOT MATERIAL HANDLER

Choose base, mast height, winch speed and load handling attachments to configure the exact material lift for any worksite. The Genie® Superlift Advantage™ SLA™-20 lift is a sturdy, manually operated material lift that helps increase productivity and value.

Features:

• Easy to set up quickly without tools in just seconds
• Removable attachments for easy storage and loading
• Multiple load-handling options
• Can be loaded easily into the bed of a pickup truck 

Sumner® Series 2100 Contractor Lifts

Series 2100 portable lightweight yet heavy duty contractors lift. Built for moving heavy materials such as steel beams. Set up is fast and easy with no tools or loose hardware to worry about. Has reversible forks for easy repositioning, lockable 5” casters in front and 10” rough terrain wheels in rear for easy loading. Unit has an inside-mast cable, avoiding any exposed cable near the operator’s face. Built-in single speed winch uses idler roller to feed cable evenly on the drum to avoid cable flats. Unique mast hold down bar holds carriage and mast during transportation.

Telpro Inc. 11' Panellift Drywall Lift

The Telpro PanelLift drywall lifter can be assembled or disassembled in seconds with no tools required. A tilting cradle brings the loading height down to a manageable 34 inches for easy installation of drywall to walls and to sloped or level ceilings up to 11 feet tall. A maximum load rating of 150 pounds ensures plenty of support for lifting all standard drywall sheets. The integral cradle outriggers extend to handle up to 4-by-16-foot sheets for drywalling that basement fast. Easy-rolling five-inch casters mean smooth transport over rough floors. And a fast-action, single-stage winch with a silent cam-lock brake offers total control over raising and lowering operations. The lift consists of three components and, when collapsed, fits into the trunk of a car. Weighing just 100 pounds, the Panellift offers plenty of support without the backbreaking haul to and from the rig.

Features:

• Genuine Panel lift brand
• Easy assembly – no tools required
• Tilting cradle
• Sheets up to 4’x16′
• Max load rating 150 lbs.

Telpro Inc. PanelLift 15-Feet Extension for PanelLift

The Telpro PanelLift drywall lifter can be assembled or disassembled in seconds with no tools required. A tilting cradle brings the loading height down to a manageable 34 inches for easy installation of drywall to walls and to sloped or level ceilings up to 11 feet tall. A maximum load rating of 150 pounds ensures plenty of support for lifting all standard drywall sheets. The integral cradle outriggers extend to handle up to 4-by-16-foot sheets for drywalling that basement fast. Easy-rolling five-inch casters mean smooth transport over rough floors. And a fast-action, single-stage winch with a silent cam-lock brake offers total control over raising and lowering operations. The lift consists of three components and, when collapsed, fits into the trunk of a car. Weighing just 100 pounds, the Panellift offers plenty of support without the backbreaking haul to and from the rig.

Features:

• Genuine Panel lift brand
• Easy assembly – no tools required
• Tilting cradle
• Sheets up to 4’x16′
• Max load rating 150 lbs.