The vertical-lift-path T76 compact track loader, part of the revolutionary R-Series loader lineup, is designed to meet the demands of today’s toughest jobsites. The 74-hp loader boasts an inline engine and direct-drive system as well as cast-steel lift arms and an optimized lift arm linkage to increase lift height and capacity. The loader's low ground pressure track system gives operators the ability to push through soft, sandy, wet or muddy conditions. Operators appreciate the loader’s powerful hydraulics and breakout forces, fast cycle times and leading operator comfort. The advanced 5-link torsion suspension undercarriage provides a more comfortable ride on long working days while enhanced features make routine service easy.
Features:
Emissions Tier (EPA) | Tier 4 |
---|---|
Engine Cooling | Liquid |
Engine Fuel | Diesel |
Horsepower | 74 hp |
Rated Operating Capacity (ISO) | 2,900 lb |
Operating Capacity (50% of Tip) | 4,120 lb |
Tipping Load | 8,240 lb |
Operating Weight | 10,250 lb |
Travel Speed | 6.8 mph |
Travel Speed (2 - Speed Option) | 9.2 mph |
Ground Pressure (Rubber) | 6.2 psi |
Fuel Tank | 31.7 gal |
System Relief @ Quick Couplers | 3,450 psi |
Auxiliary Std Flow | 23.3 gal/min |
Auxiliary High Flow | 30.3 gal.min |
Length | 147.1 in |
Length Without Attachment | 113.9 in |
Length With Standard Bucket | 147.1 in |
Width | 72.9 in |
Width (With Bucket) | 74 in |
Height | 81.7 in |
Height With Operator Cab | 81.7 in |
Height to Bucket Hinge Pin | 127.9 in |
Reach @ Maximum Height | 39.9 in |
Turning Radius | 89.3 in |
Length of Track on Ground | 59.2 in |
Track Width | 12.6 in |
Elevate your productivity with the Bobcat® T62 compact track loader’s powerful breakout forces, fast cycle times and streamlined maintenance. Featuring an inline engine and direct-drive system as well as lift arms of cast-steel construction, this radius-lift-path compact track loader is engineered to get the tough jobs done. The 68-hp T62 delivers powerful digging and grading performance and generous reach at mid-range heights. The T62 features a one-piece, sealed and pressurized cab that repels dust and dirt while providing leading visibility and unmatched comfort.
Features:
Rated Operating Capacity (ISO) | 2,150 lb |
---|---|
Operating Weight | 8,612 lb |
Ground Pressure (Rubber) | 5.64 psi |
Auxiliary Std Flow | 17.6 gal/min |
Auxiliary High Flow | 26.9 gal/min |
Emissions Tier (EPA) | Tier 4 |
Engine Cooling | Liquid |
Engine Fuel | Diesel |
Horsepower | 68 hp |
Rated Operating Capacity (ISO) | 2,300 lb |
Operating Capacity (50% of Tip) | 3,286 lb |
Tipping Load | 6,571 lb |
Operating Weight | 8,727 lb |
Travel Speed | 7.2 mph |
Travel Speed (2 - Speed Option) | 10.2 mph |
Ground Pressure (Rubber) | 5.7 psi |
The S76 skid-steer loader is designed to help you accomplish more with one machine. This 74-hp, vertical-lift-path skid-steer loader delivers powerful breakout forces, fast cycle times and upgraded lifting capabilities – including increased capacity and height. Machine enhancements include an inline engine and direct-drive system, cast-steel lift arms and improved cooling performance. It is highly maneuverable, offering effective turning and skidding that is ideal for challenging work in tight areas. All this, plus you’ll experience a new level of operator comfort thanks to a roomy cab, ergonomic controls, optional automatic heat and air conditioning and more. The S76 is optimized to deliver more usable horsepower and the overall performance you demand to take on bigger, more challenging work.
Features:
Horsepower | 74hp |
---|---|
Rated Operating Capacity (ISO) | 2,900lbs |
Operating Weight | 8,615lbs |
Auxiliary Std Flow | 23.3 gal/min |
Auxiliary High Flow | 30.3 gal/min |
Joystick Control | Optional |
Length | 147.1in |
Length without Attachment | 113.9 in |
Length with Standard Bucket | 147.1 in |
Width | 72 in |
Width with Bucket | 74 in |
Height | 81.8 in |
Height to Bucket Hinge Pin | 128.3 in |
Reach @ Maximum Height | 37.4 in |
Turning Radius | 87.7 in |
Wheelbase | 48.3 in |
If space is limited or you're in rough conditions but you need high lift capacity, the Bobcat T590 Compact Track Loader is your perfect solution. It has the highest lifting height in the 500 series: ideal for loading and unloading bricks, blocks and other palletized materials.
Features:
Ground Pressure | 5.1 psi |
---|---|
Length of Track on Ground | 4.6 ft (1 m) |
Width of Track | 12.6 in (30 cm) |
Displacement | 158.7 cu in (0 m) |
Emission Tier Level | Tier 4 |
Engine Model | V2607-DI-TE3B Interim Tier 4 |
Fuel | Diesel |
Gross Power | 61 hp (45 kw) |
Horsepower - Gross | 66 hp (49 kw) |
Peak Torque | 155.6 lbs/ft |
Power Measured @ | 2700 rpm |
Stroke | 4.4 in (10 cm) |
Torque Measured @ | 1425 rpm |
Height - Top of Cab | 6.5 ft (2 m) |
Length - with Bucket | 11.1 ft (3 m) |
Length - without Bucket | 8.8 ft (2 m) |
Overall height | 6.5 ft (2 m) |
Overall width | 5.6 ft (2 m) |
Reach at Max Lift and Dump | 1.7 ft (0 m) |
Turning Radius from Center - machine rear | 6.7 in (15 cm) |
Pump Flow | 17.1 gal/min (64 l/min) |
Pump Type | Engine driven, gear type |
Relief Valve Pressure | 3500 psi |
Breakout Force | 4753 lbs (2,156 kg) |
Operating Load | 2100 lbs (953 kg) |
Operating Width | 67 in (170 cm) |
Tipping Angle | 6000 ° |
Engine Oil Capacity | 2.6 gal (8 l) |
Fuel Capacity | 36.5 gal (136 l) |
Operating Weight | 7822 lbs (3,548 kg) |
No matter how extreme your working conditions, the vertical-lift-path Bobcat® T66 compact track loader pushes through to do more in all kinds of applications and keeps working where other equipment can’t. Also referred to as a skid-steer with tracks, the T66 includes a redesigned Bobcat inline engine and direct-drive system, lift arms with cast-steel construction and improved cooling performance.
Rated Operating Capacity (ISO) | 2,450 lb |
---|---|
Operating Capacity (50% of Tip) | 3500 lb |
Tipping Load | 7000 lb |
Operating Weight | 8927 lb |
Travel Speed | 7.2 mph |
Travel Speed (2-speed option) | 10.2 mph |
Ground Pressure (Rubber) | 5.9 psi |
Fuel Tank | 28.3 gal |
Length | 134.9 in |
Length without Attachment | 107 in |
Length with Standard Bucket | 134.9 in |
Width | 67 in |
Width (with bucket) | 68 in |
Height | 80.5 in |
Height with Operator Cab | 80.5 in |
Height to Bucket Hinge Pin | 120 in |
Reach @ Maximum Height | 36.7 in |
Turning Radius | 81.5 in |
Length of track on ground | 54.3 in |
Track Width | 12.6 in |
Track Width - Optional | 15.7 in |
Toro Dingo® compact utility loaders possess the versatility to handle countless jobs on every site: dig, haul, plant and build. The TX 427 Narrow track design provides a low 5.1 psi ground pressure which is easy on turf. Designed with workers in mind, all of its power is harnessed in only 3 easy to use controls, which make it simple for any worker to step up and be productive immediately!
Features:
Air Filter | Two-stage, heavy-duty, remote |
---|---|
Cooling System | Air Cooled |
Displacement (cc) | 725 |
Displacement (cu. in.) | 44 |
Dump Angle | 38 degrees |
Dump Height (cm) | 117.1 |
Dump Height (inches) | 46.1 |
Engine Make | Kohler |
Engine Model | Command Pro Series CH740 |
Fuel Tank (gallons) | 6 |
Fuel Tank (liters) | 23 |
Fuel Type | Gasoline |
Ground Clearance (cm) | 11.7 |
Ground Clearance (inches) | 4.6 |
Ground Pressure | 5.0 psi |
Ground Speed Forward (mph) | 4.5 |
Ground Speed Foward (km/h) | 7.2 |
Ground Speed Reverse (km/h) | 3.2 |
Ground Speed Reverse (mph) | 2 |
Hinge Pin Height (cm) | 167.1 |
Hinge Pin Height (inches) | 65.8 |
Hydraulic Flow Auxilary | 11.4 gpm |
Hydraulic Flow Traction | 16.9 gpm (each pump) |
Hydraulic Pressure | 3,000 psi |
Loader Arms | Radial |
Manufacturer's Gross HP Rating (HP) | 25 |
Manufacturer's Gross HP Rating (kW) | 20.1 |
Max Operating Height (cm) | 229 |
Max Operating Height (inches) | 90.1 |
Oil Capacity (liters) | 2.95 |
Designed with vertical lift loader arms, its 1,000-lb. rated operating capacity delivers category-crushing performance that’s an industry game-changer. The Dingo TX 1000 also offers increased reach at full height for maximum jobsite productivity. And speaking of productivity, an 81" (206 cm) hinge pin height allows the arms to clear the side of a 30-yard dumpster or one-ton truck. This lightweight, maneuverable machine packs unmatched strength and reach in a compact package for the ultimate working advantage.
Features:
Air Filter | Two-stage, heavy-duty, remote |
---|---|
Cooling System | Liquid Cooled |
Displacement (cu. in.) | 77 |
Dump Angle | 40 degrees |
Dump Height (inches) | 61 |
Engine Make | Kubota |
Engine Model | D1305 |
Fuel Tank (gallons) | 11.5 |
Fuel Type | Diesel |
Ground Clearance (inches) | 6 |
Ground Pressure | 3.6 psi |
Ground Speed Forward (mph) | 4.7 |
Ground Speed Reverse (mph) | 4.7 |
Hinge Pin Height (inches) | 81 |
Hydraulic Flow Auxilary | 15.2 gpm |
Hydraulic Flow Traction | 13.3 gpm (each pump) |
Hydraulic Pressure | 3000 PSI |
Loader Arms | Vertical Lift |
Manufacturer's Gross HP Rating (HP) | 24.9 |
Max Operating Height (inches) | 105 |
Oil Capacity (quarts) | 6 |
Overall Height (inches) | 53.2 |
Overall Length w/bucket (inches) | 100.7 |
Overall Height (inches) | 53.2 |
Overall Length w/o bucket (inches) | 81.7 |
Overall Width (inches) | 41 |
Reach – Fully Raised (inches) | 24.5 |
Weight (lbs) | 2790 |
Wheelbase (inches) | 41 |
Track Width (inches) | 9.5 |
Designed with vertical lift loader arms, its 1,000-lb. rated operating capacity delivers category-crushing performance. The Dingo TX 1000 also offers increased reach at full height for maximum job site productivity. And speaking of productivity, an 81" (206 cm) hinge pin height allows the arms to clear the side of a 30-yard dumpster or one-ton truck. This lightweight, maneuverable machine packs unmatched strength and reach in a compact package for the ultimate working advantage.
Features:
Air Filter | Two-stage, heavy-duty, remote |
---|---|
Cooling System | Liquid Cooled |
Displacement (cc) | 1262 |
Displacement (cu. in.) | 77 |
Dump Angle | 40 degrees |
Dump Height (cm) | 154.9 |
Dump Height (inches) | 61 |
Engine Make | Kubota |
Engine Model | D1305 |
Fuel Tank (gallons) | 11.5 |
Fuel Tank (liters) | 44 |
Fuel Type | Diesel |
Ground Clearance (cm) | 15.2 |
Ground Clearance (inches) | 6 |
Ground Pressure | 5.6 psi |
Ground Speed Forward (mph) | 3.7 |
Ground Speed Foward (km/h) | 6.1 |
Ground Speed Reverse (km/h) | 6.1 |
Ground Speed Reverse (mph) | 3.7 |
Hinge Pin Height (cm) | 205.7 |
Hinge Pin Height (inches) | 81 |
Hydraulic Flow | 13.3 gpm (each pump) |
Hydraulic Flow Auxilary | 15.2 gpm |
Hydraulic Pressure | 3,000 psi |
Loader Arms | Vertical Lift |
Manufacturer's Gross HP Rating (HP) | 24.8 |
Manufacturer's Gross HP Rating (kW) | 18.5 |
Max Operating Height (cm) | 266.7 |
Max Operating Height (inches) | 105 |
The SCL1000, compact in size, packed with performance and features. The SCL1000 features a wide 9.8-inch track that comes standard on the narrow, 36-inch machine. Boasting a powerful 24.8 horsepower turbo-charged Kubota diesel engine, this machine is able to handle all of those tough tasks and materials. Precision engineered with cushioned loader boom cylinders and an adjustable platform suspension system, this machine is determined to increase operator comfort for maximum productivity.
Features:
Horsepower (gross) | 24.8 |
Displacement (cu. in.) | 54.8cu.in |
Engine Type | Water cooled 4 cycle diesel engine with 3 cylinder, turbo, EPA Tier 4 |
Rated Speed | 2800rpm |
Low Idling Speed | 1250rpm |
Overall Length | 107.7in |
Overall Height | 55.7in |
Rated Operating Capacity (ROC) | 1000lbs @ 35% |
Tipping Load (lbs.) | 2857lbs (1296 kg) |
Auxiliary Hydraulic Pressure (psi) | 2800 |
Overall Width w/Std Bucket | 36in (91.44 cm) |
All Rights Reserved | Windham Rental Center
Built & Powered By ADVantage Media