Plumbing Rentals

Ridgid 62605 3/4-Inch x 1/8-Inch x 100-Feet Flat Sewer Tape

The Ridgid 62605 is a 3/4" x 1/8" x 100' one-piece flat sewer tape. This tape has the size and length for use on sewer and drain lines through 8" in diameter and up to 100' in length. Each model of the Ridgid sewer tape has a hand grip, a roller ball on one end and a spear point, for breaking up debris, on the other end. This model comes equipped with a carrying harness for easy mobility across job sites. Why do so many professionals choose RIDGID tools? The answer is simple, trust. Millions of RIDGID tools go to work every day in plants, on construction sites and in countless other harsh environments. One of the design parameters for developing RIDGID tools is efficient operation. We engineer ease-of-use into every product. And, we include innovative features to ensure that our tools and machines get jobs done as quickly as possible without compromising quality.

Features:

• 3/4" in Diameter and 100' in Length
• Has a Hand Grip and Spear on One End and Roller Ball at the Other
• Made for Sewer Drain and Drain Lines
• Comes With Carrying Harness

Mini-Rooter Pro™ 1/3 hp Drain Cleaner with 50 ft x 3/8 in. Cable and Cutter Set

You can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker. An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute. The drum carries up a 50 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables. Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.

Ridgid Drain Cleaning Cable, 5/16 In. x 25 ft.

Drain Cleaning Cable, With Drop Head Auger, Size 5/16 In x 25 Ft, Steel Construction, For Use With G2037506, 4MY89, 4Z661, G1501245 Drain Cleaning Machines, Used To Clean Sewer Pipes.

Features:

• Power Tools and Accessories
• Manufacturer: Ridgid
• For Use With Ridgid Drain Cleaning Machines
• Easy Snap-on Attachment to Cables
• Spins Auger Heads to Clear out Debris from Pipes
• Drain Cleaning Auger
• Use to Clear Out Stoppages, Roots, Rags and Sticks

General Wire SV-F Super-Vee Drain/Sewer Cleaning Machine W/ 25' x 1/4" Cable

The Super-VeeTM offers you a complete system for cleaning drain lines through 3" in diameter. With a variety of cables, cutters, and accessories available, you have the right combination for any clogged drain problem.The Super-Vee is built to clear clogged drains for a decade or more. And our Dyna-ThrustTM bearing system is one reason why. It helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Of course the cables are Flexicore® - with an integral wire rope center. Nobody makes cables like General. With a quick movement of the Grip Shield, you release or engage the cable - without the need for a chuck, and with automatic adjustment for different diameter cables. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times. Because the chuck is linked to the Grip Shield, handling is easy and comfortable. To switch to a different diameter cable (or even connect two 3/8" cables together), you just loosen three screws, pull the front of the drum off the cable, and load in another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you'll probably want to store all of your cables in them.

General Wire I-3FL-DH 3' Flexicore® Closet Auger with Down Head

The three foot Flexicore® Closet Auger is the ideal tool for breaking up stoppages or retrieving lost objects in clogged toilet bowls. It works where plungers fail. The patented Flexicore® cable is made from two layers of tempered spring wire wrapped tightly around a 49-stand wire rope center. It resists kinking and breaking yet has the right flexibility to get through low flow toilets. It's so tough, it's guaranteed for a full year. The optional down head works like a universal joint, following the bowl contours while protecting inner bowl walls from chipping or breaking. The brass finish steel tube and galvanized steel turning rod can handle lots of abuse. Other features include vinyl bowl guard to protect the bowl against scratching, vinyl grip handle with "Grip Clip" to hold cable, and a smooth turning handle for easy operation.