Rotary Hammer Rentals

BOSCH SDS-max® 2 In. Combination ROTARY Hammer

The Bosch RH1255VC SDS-max® 2 In. combination hammer has Turbo Power, which gives the tool a torque and speed boost in hammer mode. It also provides 14.1 Ft.-Lbs. of impact energy for top-rated power. At under 27 Lbs., it has outstanding performance-to-weight ratio in a 2 In. hammer. It features Vibration Control for additional operator control while mitigating vibration in the hammer mechanism and in the handle. This hammer provides Constant Response circuitry for smooth starts, precise hole placement and constant speed under load. Vario-Lock positioning permits rotating and locking the chisel with precision. And the SDS-max® bit system provides tool less bit changes.

BOSCH CORDLESS ROTARY HAMMER BITURBO WITH SDS MAX

The GBH 18V-45 C Professional rotary hammer delivers cordless freedom with corded performance. Its new high-performance brushless motor and the new ProCORE18V batteries provide 12.5 Joules of impact energy with enough power for even the most demanding SDS max applications. At the same time a highly optimized drive train leads to a significant reduction in the weight of the GBH 18V-45 C; this makes it lighter than comparable corded products, even with an attached ProCORE18V 12.0 Ah battery.

Features:

• Cordless freedom with corded performance thanks to BITURBO Brushless technology
• Up to 700 g less weight than comparable corded products thanks to a highly optimized drive train
• KickBack Control for reduced hazard of sudden tool reactions and Soft Start EPC & ASC for a comfortable and precise work process

HILTI TE 70-ATC/AVR ROTARY HAMMER

Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty drilling and chiseling in concrete.

Features:

• Active Torque Control (ATC) stops the tool body from spinning uncontrolledly if the drill bit jams – helping to reduce a common safety hazard
• Active Vibration Reduction (AVR) makes the tool less tiring to use – helping to increase daily productivity
• Virtually maintenance-free brushless SR motor and double-chamber lubrication systems for longer service intervals and tool lifetime
• Optional DRS-Y dust removal system collects up to 95% of dust
• Detachable supply cord for quick and easy replacement of damaged/broken cords on the jobsite

Metabo HPT 1-1/2-in Spline Variable Speed Corded Rotary Hammer Drill

The 1-1/2 Inch Spline Shank Rotary Hammer (DH38YE2) is the next generation in Metabo HPT hammer technology. Compared to its predecessor the DH38YE, the DH38YE2 packs power into a more ergonomic body that is 2.9 lbs lighter, while delivering less vibration and a lower noise level. The DH38YE2 is designed for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods.

Features:

• POWERFUL: 8.4 Amp motor delivers 950 watts of input power for maximum productivity
• IMPACT: 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete
• LIGHTWEIGHT: At only 14.1 lbs
• DUEL MODES: Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob
• LOW VIBRATION: Levels of only 18.8m/s2 (full load) for more comfortable operation in hand
• LOW NOISE: Only 95.2 dB (full load) for a less noisy work environment
• SAFETY CLUTCH: Shuts down rotation in the event of a bound bit for improved user protection
• DUST RESISTANT: Cover protects the tool from dust and debris and prolongs tool life
• BRUSHES: Auto-stop carbon brushes prevent motor damage and are accessible for simple maintenance checks

15 Amp 3/4 in. SDS-MAX Corded Combination Hammer with E-Clutch

The MILWAUKEE 3/4" SDS Max Rotary Hammer has a powerful 15A Motor capable of delivering 8.1 ft-lbs of impact energy for the most demanding applications. The AUTOSTOP E-Clutch prevents over-rotation of the tool in case of tool lock up giving users a more controlled experience while using the corded rotary hammer drill. The variable speed dial allows users to set the optimal speed per application while two modes, Rotary Hammer and Hammer Only, allow easy transitions between drilling large holes or chipping applications. When chipping, a lock-on button allows users to chip without constantly pulling the trigger. Built-in Advanced AVS (Anti-Vibration System) minimizes the vibration users feel while using the rotary hammer drill.Powerful 15A Motor

Features:

• E-Clutch for user protection
• Built to last in the toughest applications
• 8.1 ft lbs. Impact Energy
• AUTOSTOPE-Clutch
• Variable Speed Dial
• Advanced AVS Anti-Vibration System
• 2 Mode: Rotary Hammer and Hammer Only
• Lock-On Button
• 380 RPM
• 2,900 BPM
• 10 m/sq. sec Vibration