Serving Southern Maine Since 1996

Post Hole Digger Rentals

GROUNDHOG C-71-5 Earthdrill

The Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance. The heart of this unit is our time-tested transmission. The transmission is an efficient worm drive design utilizing alloy steel shafts, large tapered roller bearings and our standard 7/8” square auger drive.

Aluminum castings are used throughout the C-71-5's construction to produce a unit that is both strong and lightweight. The C-71-5 uses an air cooled centrifugal clutch and a trigger-type, return-style throttle. Both operator positions are equipped with individual stop switches and tubular steel handlebars.

Maximum Auger Speed 160 rpm @ 3600 engine rpm (no load)
Maximum Torque 192 ft. lbs. torque (approximate)
Max. Auger Diameter 12 inches (31 cm)
Weight 72 lbs. (33 kg)
Length 40.5 inches (103 cm)
Width 30 inches (76 cm)
Height (Honda) 20.5 inches (52 cm)
REQUEST A QUOTE CALL TO RESERVE

GREENWORKS ELECTRIC 82-Volt Earth Auger

Commercial grade brushless motor delivers more torque and efficiency than gas! Drill up to 35 holes on one charge when using 8" bits and a fully charged 4.0AH battery. Performance will vary based on conditions. Brushless motor provides more torque, quiet operation, and longer life. Designed with the professional landscaper in mind, the Greenworks commercial 82-volt Earth Auger with Xcore delivers as much power as a 45cc gas engine.


Features:

  • Bit diameter: 8”
  • Bit Speed: 210 rotations per minute
  • What's Included: (3) Ring Pings, (1) Extension Shaft, (1) Extension Shaft, (1) Adapter, (1) Auger, (1) 4Ah Battery and (1) 8A Dual Portal Charger
Weight 2620 Pounds
Length 132 inches
Height 89 inches
Hitch 8″ Height Adjustable 2″ Bulldog
Fuel Capacity 9 Gallons
Horsepower 35 HP
Torque 53 Ft Lbs
Cooling Medium Forced Air
Wheel Diameter 26 inches
Wheel Thickness 1 1/2 inches
Disk Balance Precision High Speed Balanced
Wheel Speed 1850 RPM Nominal
Number of Knives 2
Knife Dimensions 7 1/4″ x 4″ x 1/2″
Anvil 3″ x 6″ x 1/2″ AR400
Chip Throwers Two 1/4″x 4″ x 3″ x 9 1/2″ long
Throat Opening 12″ x 6″
Feed Motors 22.8 in cu Top 14.2 in cu Btm
Flow 5.33 GPM
Hydraulic Drive Live – Driven off engine
Autofeed Digital Fully Adjustable
Feed Rate 80 Feet Per Minute
Feed Rollers Top 10 1/2″ x 12″ Btm 6 1/2″ x 12″
Springs Two 15″ Tight Wound Powder Coated
Slide Bearings Two 1″ Flange Mount
Lift Cylinders None
Discharge 360 Adjustable Swivel w/Deflector
REQUEST A QUOTE CALL TO RESERVE

GAS POWERED ICE AUGER

Enjoy your day ice fishing and drill through the ice with ease with this gas powered ice auger.

REQUEST A QUOTE CALL TO RESERVE

COMPAC A2-PHD TOW BEHIND HYDRAULIC POST HOLE DIGGER

225 lbs weight. 9 H.P. Honda Power. 6 gpm Pump flow at 3600 rpm. post hole digger - 110 rpm. Tent Erector - 220 rpm. 1 3/8in Hexagon auger drive - standard. 7/8in Square auger drive - optional. 1 3/16inch diameter stihl auger dirve - optional. Augers available - 6in to 12in diameter. Easily towable. No strain one person operation. No torque reaction. Reversible. Operate right up to walls and fences


Features:

  • Engine base swivels to keep engine level and balance operation
  • Unique swivel and rotation joints combine to permit work on slopes at any angle
  • Auger stays on when moving to next hole
  • Relief valve stall protection
  • Available without tow kit
REQUEST A QUOTE CALL TO RESERVE
Share by: