Roofing & Siding Equipment Rentals

BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer. Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing. The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Features:

• The sliding nail gun has lightweight aluminum housing for job site durability
• Zero nail lockout feature of the siding nailer eliminates dry firing and indicates when to reload the magazine
• Nosepiece of the coil siding nailer features carbide inserts for long-life performance
• Aggressive wear guards and skid pads protect the tool from damage on abrasive surfaces
• Quick-set adjustable depth guide sets nails to desire depths quickly and conveniently
• Patented single-action side load canister for fast, one-step nail loading
• Adjustable shingle guide for quick shingle spacing
• Over molded grip for comfortable use. Full round driver for more consistent drive quality
  

BOSTITCH 2-IN-1 FLOORING NAILER TOOL

BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2-in to 2-in length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs.

Features:

• Drives 15.5-gauge staples and 16-gauge "L" shape cleat nails from 1-1/2-in to 2-in length
• Mallet actuated pneumatic driving action
• Non-marring, interchangeable base plates for 1/2-in (12.7 mm) through 3/4-in (19.1 mm) flooring
• Includes tool, mallet, oil, wrenches, 1/4-in (6.4 mm) air fitting
• Ergonomically designed with longer handle and a comfortable rubber grip
• Low air requirements at 3.7 SCFM
  

BOSTITCH 2-IN-1 FLOORING NAILER TOOL

The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them. Harness the power of compressed air and complete your stapling jobs quickly and easily. Just connect the Bostitch MIIIFS Pneumatic Floor Stapler to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 92-staple magazine will keep you working without interruption. Ergonomically designed for ease of use, the MIIIFS features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive staples at the proper depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade result every time. The MIIIFS Pneumatic Floor Stapler's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this stapler will withstand the wear and tear of any jobsite. The Bostitch MIIFS Pneumatic Floor Stapler measures 3.13 x 14.8 x 17.25 inches (WxHxL) and weighs 11.2 pounds.

Features:

• 420 in./lbs. of driving power
• High-speed, mallet-actuated operation
• Extra-wide base plate for stability and control
• Ergonomic design with elongated handle
  

BOSTITCH 2-IN-1 FLOORING NAILER TOOL

The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them. Harness the power of compressed air and complete your stapling jobs quickly and easily. Just connect the Bostitch MIIIFS Pneumatic Floor Stapler to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 92-staple magazine will keep you working without interruption. Ergonomically designed for ease of use, the MIIIFS features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive staples at the proper depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade result every time. The MIIIFS Pneumatic Floor Stapler's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this stapler will withstand the wear and tear of any jobsite. The Bostitch MIIFS Pneumatic Floor Stapler measures 3.13 x 14.8 x 17.25 inches (WxHxL) and weighs 11.2 pounds.

Features:

• 420 in./lbs. of driving power
• High-speed, mallet-actuated operation
• Extra-wide base plate for stability and control
• Ergonomic design with elongated handle
  

14-Gauge Shingle Shovel with Fiberglass D-Grip Handle

Bully Tools Shingle Shovels feature a design preferred by professionals. True 14-Gauge steel with a back fulcrum tears through roofing shingles with the perfect power and leverage. The triple wall fiberglass handle resists breakage while still being lightweight and easy to handle. The Dgrips have been redesigned for superior comfort and durability. Made with a special no-break Polypropylene co-polymer, you won't find a stronger dgrip. Watch our video to see it crush a cement block.

The Super Shear Shingle Cutter

The AJC Super Shear, made from lightweight aluminum for durability and weighs only 16 lb, with a 21” cutting blade. It is extremely effective at cutting a variety of materials, including thick laminate shingles, and even some soft metals. It employs a patent pending spring-loaded shear tension adjustment that allows the user to adjust the amount of contact pressure between the cutting blades for different materials, less pressure for thin/soft and more pressure for thick/tough. The fence is adjustable to hold shingles for almost any cut. The blades are made of alloy steel and are replaceable. Built in scales measure length and roof pitch angles, the attached bracket and rubber feet provide rooftop stability

PRO 19 MATERIAL BRAKE

The PRO 19 brake reduces time-consuming handling and flipping of material for more efficient creation of soffit, fascia, custom brickmold, gutter aprons, chimney flashing, drip edges, window casing and sill trim, and roof flashing.

Features:

• Efficient locking system uses a pulling motion, allowing you to remain closer to the tool when working with large coil
• Individual bending handles also allow you to get closer to the work, compared to loop-design handles
• Patented Moving Pivot Hinge increases bending power without marring materials
• Dual locking handles provide fast, secure clamping
• Available Lengths: 8’ 6”, 10’ 6”, 12’ 6”
• Weight: 8’ 6” 96 lbs; 10’ 6” brake, 121 lbs; 12’ 6” brake, 147 lbs.
• Throat Depth: 19”
• Mouth Opening: 2-3/8”
• Bending capacities: All vinyl; soft aluminum up to .030; galvanized steel up to 28 ga; copper sheet and coil up to 16 oz.